What are the precautions for using thermal silicone pads?

Release time：2025-12-09

There are 5 key precautions:

① Clean the surface: Before use, use a cleaning agent such as anhydrous ethanol to remove oil and dust from the surface of heat-dissipating substrates (chips, radiators), as impurities will reduce thermal conductivity

.② Control the thickness: Select an appropriate thickness according to the heat dissipation gap (usually 0.5–5 mm). Excessive thickness reduces thermal conductivity, while insufficient thickness may result in poor contact.

③ Avoid over-compression: Apply uniform pressure during installation to ensure full contact only. Over-compression will damage the structure of the silicone pad and impair thermal conductivity.

④ Do not reuse: Once attached, the thermal silicone pad forms a tight bond with the substrate. Impurities will remain on the surface after disassembly, and reuse will significantly degrade performance.

⑤ Standard storage: Store sealed in a cool and dry environment, away from moisture, high temperature or direct sunlight to prevent aging and loss of stickiness.

Previous Page:No More!

Next page:What are the types of conformal coatings ?

More Information

2025-12-09

What are the main functions of conformal coating?

The core function of conformal coating is to provide all-round protection for electronic components and PCB boards, ensuring the reliability of equipment in complex environments, including:Anti-moisture/anti-mold: forms a dense protective film to isolate water vapor and condensation, avoid circuit s

2025-12-09

What Factors Affect the Light Energy Received by the Conformal Coating ?

There are three core factors that affect the reception of light energy by glues, especially light-curable glues:Light source characteristics: the higher the power of the light source, the longer the irradiation time, the stronger the light energy; The wavelength needs to match the glue photosensitiv

2025-12-09

Are conformal coating and conformal paint the same thing?

The essence of the two in the industry belongs to the same type of electronic protective materials, only the names are different, and the core functions are completely the same - both form a dense protective film on the surface of electronic components and PCB boards to achieve the effect of anti-mo

2025-12-09

What are the types of conformal coatings ?

According to the composition and curing characteristics, conformal paints are mainly divided into four categories: (1) Acrylate type: cost-effective, fast curing, easy to spray and construction, good repairability, suitable for general electronic equipment protection; (2) Silicone type: high and low